TENSILE WATER
Solutions & Representation
Halogen SystemsInc.
MP5-A Return on Investment Calculator
Online Chlorine Analysis · Municipal Water Treatment
NSF-61 Certified
No wastestream required
🏗️ Unit Configuration & Investment
🏭 Treatment Plant
×
$
$7,900
📡 Grab Stations Cellular
×
$
—
🔵 Add'l Distribution
×
$
—
🧪 pH Units
Competitor electrode sensors displaced — each monitoring point counts separately
⚡ MP5-A Parameters
Annual Maintenance20 min/yr (fixed)
Annual Wear Parts$520/yr (fixed)
5-Year Refresh Kit (amortized)$252/yr ($1,260 ÷ 5)
Total MP5-A Annual Parts$772/yr
Chlorine Analyzer Wastestream70,000 gal/yr saved
Built-in pH Probe WastestreamZero · NSF-61
Include Competitor pH Sensor Wastestream
~0.1 L/min · ~13,870 gal/yr per unit
~0.1 L/min · ~13,870 gal/yr per unit
🔧 Traditional DPD Parameters
MAINTENANCE TIME
Monthly Maintenance180 min/yr
pH Probe Cleaning (weekly)1,560 min/yr
pH Calibration (weekly)520 min/yr
Include Extended Acid Soak (45 min)
WEAR PARTS & CONSUMABLES
Reagents (monthly)$979/yr
Standard Cell Solution$128/yr
🔧 Traditional Amperometric Parameters
Include pH Sensor Maintenance (+$266/yr)
🧪 Grab Sample Parameters
↑ Set Grab Stations above to activate
Sample Stations (from Unit Config)
0 stations
Include Vehicle / Fleet Costs
Include Grab Sample Savings in Total ROI
Annual Labor Savings
$0
— hrs saved/yr
Competitor time/yr—
MP5-A time/yr—
Time saved × units—
Annual Parts Savings
$0
per year
Competitor parts/yr—
MP5-A parts/yr$772
Savings × units—
Competitor Annual Cost
$0
What they're spending right now
Monthly Cost of Delay
$0/mo
Every month without MP5-A costs them
🚿
Chlorine Analyzer Wastestream
$0
— gal/yr eliminated
Competitor waste/yr70,000 × units
MP5-A wastestreamZero (NSF-61)
Value at state rate—
⚗️
pH Sensor Wastestream
$0
~13,870 gal/yr per unit
Competitor pH waste~0.1 L/min
MP5-A pH (built-in)Zero
Total gal eliminated—
📉
Total Water Reclaimed
0 gal/yr
Chlorine analyzer units—
pH sensor units—
Dollar value at water rate—
🧪
Grab Sample Elimination Savings
MP5-A continuous monitoring replaces manual daily DPD sampling
$0
—
Annual FTE Labor Saved—
Annual DPD Reagent Saved—
Gross / Net After Cellular—
⚡ Total Projected Savings
1-Year Savings
$0
Annual total · all contexts
3-Year Savings
$0
Typical decision horizon
5-Year Savings
$0
Long-term value
Refresh kit amortized in annual cost
🏭 Treatment Plant
—
—
📡 Distribution
—
grab + add'l combined
💡 Combined Payback
—
total investment
📈 Cumulative Savings vs. Investment
Cumulative Savings
Total Investment
Payback Crossover
📊 Annual Cost Breakdown: MP5-A vs. Traditional DPD
All body columns show per-unit costs. Footer shows total across all configured units.
| Cost Category | Traditional DPD (per unit) | MP5-A (per unit) | Savings (per unit) |
|---|---|---|---|
| Labor (maintenance + calibration) | — | — | — |
| Parts & Consumables | — | $772 | — |
| Chlorine Analyzer Wastestream | — | $0 | — |
| pH Sensor Wastestream † | — | $0 (built-in) | — |
| Grab Sample Program ‡ | — | $0 · Continuous | — |
| Per-Unit Annual Savings (sensor only) | — | — | — |
| Total All Units | — |
† pH wastestream savings reflect all — pH units configured, which may differ from chlorine analyzer count — each displaced electrode sensor is counted independently.
‡ Grab sample savings are a fleet-level cost tied to grab station units — per-unit × analyzer count will not equal the total line when grab savings are included.
‡ Grab sample savings are a fleet-level cost tied to grab station units — per-unit × analyzer count will not equal the total line when grab savings are included.
Wages from BLS OES 518031 with 1.40× burden multiplier · Water rates are estimated municipal production costs — update to utility's actual internal rate for precision.
All values are estimates — adjust inputs to match your prospect's actual conditions.
All values are estimates — adjust inputs to match your prospect's actual conditions.